16
3.2.1
Setting Clock and Date
Pressing SET TIME key enters to the time & date setting mode. Date is displayed
in format DD/MM/YY and clock in format HH/MM/SS.
“Set Clock [HHMMSS]” / “Set Date [DDMMYY]”. The user has to enter new
values in the same format shown in brackets (without ‘/’ character) then to press
CONF. For example, the date 27/6/2001 will be set as 270601 and the time
18:03:34 will be set as 180334.
After pressing CONF key, software will check if new values are legal. If so,
software will return to the previous mode in which it was before entering this
mode, or else an error message will be displayed.
Notes:
-
Pressing ESC key will implement the ‘BACK SPACE” function.
-
Double clicking on CONF key will keep current clock/date value.
-
Old date/clock values will be kept until valid values will be entered.
-
RCI5000 supports leap years.
-
At any type of reset the values of date and time will be reset to zero.
3.2.2
General Setup
3.2.2.1
Set New RCI5000 ID Number
RCI5000 ID is a unique number used to distinguish between several RCIs in cases where
more then one RCI5000 is connected to PC.
By default the number is 0 and user can change it from 0 to 12 by following next steps:
Enter Setup menu using the scroll down/up to General Setup and enter to Set New RCI
ID.
The RCI5000 will present the current ID after the equal sign and by pressing CONF key
user can enter new value.
3.2.2.2
Set Buzzer ON/OFF
The RCI5000 generates a sound whenever the user presses a key and a “message
received” sound whenever an incoming message is received. User can make a global
buzzer mute by entering to General Settings in the main menu then selecting Buzzer
ON/OFF. To turn on the buzzer press select Buzzer ON/OFF again.
When In
Local
mode only, the operator is informed of incoming messages by the buzzer
and the blinking CONF LED. To disable only the buzzer sound in this case press
SHIFT+CONF keys (CONF LED will continue to blink).
Notes:
