kozy heat PRINCETON RPC-36, Руководство по установке и оптимизации

Страница: 35 / 62

MILLIVOLT BOARD REMOVAL
1. Models PRC-36 & PRC-36-RF: Turn gas control knob to the
„OFF‟ position.
2. Shut off gas supply at the manual shut-off valve.
3. Disconnect gas line flex tube from the manual shut-off valve.
4. Model PRC-36: Disconnect any wall switch, remote control
or thermostat wires from top & bottom terminals on the gas
valve.
Model PRC-36-RF: Unplug fan cord from receptacle, discon-
nect the (2) wires from fan cord. (The wires will remain con-
nected to the back of gas valve).
5. Remove upper hood, upper louver.
6. Remove glass assembly.
7. Remove logs, pilot shield and ember log refractory.
8. Remove pilot shield.
9. Remove screws securing front left and back right log grate
legs. Remove burner/log grate assembly from firebox by lifting
front of burner assembly up out of flange while pushing pilot
assembly back slightly.
10. Remove screws securing front burner assembly. Remove front
burner assembly.
11. Remove adjustable venturi mounting spacers.
12. Remove (8) screws securing millivolt board. Lift board up and
out of firebox.
CAUTION: If the burner and/or pilot have been burning, use the appropriate protection to avoid burns or damage to personal property before
removing any components.
PAGE 34
BURNER LOG GRATE ASSEMBLY
REMOVE (8) SCREWS
PILOT SHIELD
FRONT BURNER ASSEMBLY
REMOVE (2) SCREWS
REMOVE (2) SCREWS