L. COMPLETE THE INSTALLATION
1. THIS STEP SHOULD ONLY BE DONE BY A QUALIFIED INSTALLER OR SERVICE TECHNICIAN:
A) Perform lighting and shutdown procedures as described on pages #19-#20 for Model #CSK-335 and pages
#22-#23 for Model #CSK-335-RF. This should be done prior to re-installing the glass so that any necessary
adjustments can be made and proper operation and log position verified.
2. RE-INSTALL THE GLASS. Refer also to Figure L-1.
Figure L-1
WARNING:
DO NOT OPERATE THIS FIREPLACE
WITH THE GLASS ASSEMBLY REMOVED,
CRACKED, OR BROKEN. Replacement of the
glass assembly should be done by a licensed or
qualified service person.
TWO GLASS LATCHES
A. Align the 2 slots in the top of the glass assembly over
the 2 tabs on the fireplace (at the top).
B. Place the glass assembly so it is flush with the front of
the fireplace front.
C. While holding the glass assembly, pull the latches out
and secure over the glass latch clips on the bottom of
the glass frame locking it in place.
Left intentionally blank.
Page 17
