OPTIONAL: We recommend placing non-faced
fiberglass batting insulation between the pipes and
existing chimney to prevent heat loss up the
chimney. (See Figure E-4)
OPTIONAL:
PLACE NON-FACED FIBERGLASS BATTING INSULATION
BETWEEN THE PIPES AND EXISTING CHIMNEY TO
PREVENT HEAT LOSS UP THE CHIMNEY.
Figure E-4
3. CONNECT THE VENT SYSTEM TO THE AIR DUCT
A. Place the air duct into the existing fireplace opening. Figure E-5.
B. Place a bead of sealant (provided) around the 3” exhaust pipe (red marking) and slide it inside the 3" collar
marked ‘Exhaust’ on the air duct. Secure with (3) ½" self-tapping screws, provided. Apply additional sealant
around the joint to ensure an air tight seal. Figure E-6.
C. Apply a liberal bead of sealant (provided) around the 3” collar on the air duct. Slide the 3” combustion intake
pipe over the collar and secure with (3) ½" self-tapping screws, provided. To ensure an air-tight seal, apply
additional sealant around the joint. Figure E-6.
AIR DUCT
SHEET METAL S REWS
C
(3 TOTAL)
Figure E-5
Figure E-6
SEALANT
Page 11
