Kozi 100 & Insert, Руководство пользователя

Страница: 4 / 24

Page 4
I. Installation And Operation Manual
This heater is suitable for both mobile home and conventional home installations. Read
all instructions carefully before starting installation. Save this manual for future refer-
ence.
1. Preamble : Instructions for Safe Installation and Operation.
1. Read these instructions carefully. Failure to follow them could cause
malfunction or damage to the heater, property damage, bodily injury
and even death.
2. Familiarize yourself with the operation of the heater. (See “Heater
Operation” section). If you are not sure, ask your dealer for explana-
tions on your heater’s operation.
3. The burn pot of this heater is designed for premium grade wood pellets.
Pellets with too much fines and saw dust must be screened before use.
DO NOT USE WET PELLETS. High ash content fuel will clog the
burn pot holes and, as a result, the burn pot will require frequent
cleaning.
4. Oil the motor bearings every 6 months. See “Maintenance” section for
more details.
5. Check your local building codes. All installations must comply with
their rulings.
6. This heater requires a minimum 6 inch (150 mm) floor protector in
front of the heater. This is to catch any spillage that may occur during
opening and closing of the door.
7. Use only UL/ULC listed Type Pl or Type L venting for the exhaust
system. The heater is designed for use with 3 inch (76 mm) vent pipe.
Avoid using long runs and too many bends. It may be necessary to
increase the size of venting to 4 inches (102 mm) if long runs and too
many bends are unavoidable. See “Venting System” for more details.
8. Combustion of wood pellet fuel deposits ashes in the heater and venting
system. These ashes must be removed from the heater regularily
(apporximately once a week). If a high ash content fuel is used,
cleaning must be done on a more frequent basis. The entire system
must also be cleaned at the start of each heating season. A yearly
inspection of the venting is highly recommended.