COMMISSION
kortho
KGJ X18
H550 AE
Rev.: 001
7-6
Fig. 7.10 Diagnostics – Test menu
10.
Set the
Speed
to 10 m/min
11.
Place a piece of paper or something similar in front of the printhead.
12.
Touch the
Test
button (behind
) to make a sample print and move the piece of paper along the
printhead at the same time.
13.
Check whether a test print is made. The test print is probably not readable but this is not important
yet, this test is only to check whether the printhead prints. If the test failed, refer to chapter 9.
14.
Check whether the function indicator of the photocell will be lit when moving the product at
operational distance along the front of the photocell.
15.
Adjust the scanning sensitivity of the photocell if necessary.
16.
Proceed, depending if an encoder is used, with either subsection 7.3.2 or 7.3.3.
7.3.2 Tuning the test print with the encoder disabled
1.
Proceed with this subsection only if the instructions of the subsection 7.3.1 are successfully carried
out.
2.
Touch
Setting
icon.
3.
Touch the
Signal
button
4.
Set the
Use encoder
setting to
No
.
5.
Touch the
button.
6.
Set the
Speed
to the estimated speed of the substrate.
7.
Set the
Print delay
to the value of the distance between the photocell and the printhead, refer toFig.
6.17 dimension B. The delay value is in millimetres at the correct speed setting.
8.
Remove all the tools and loose materials from the host machine and start the host machine.
Move a sample product along the photocell and the printhead. A test print (
9.
Fig. 7.11) should be made on the sample product.
10.
Check whether the complete test print is made on the sample product. The test print may be
mirrored but this is not relevant for this procedure:
a.
If the begin of the test print is missing, increase the delay parameter or reposition the
photocell closer to the printhead housing.
b.
If the overall length of the test print is shorter than 100 mm, decrease the speed parameter.
c.
If the overall length of the test print is longer than 100 mm, increase the speed parameter.
d.
If the end of the test print is missing, decrease the delay parameter or use a longer sample
product.
Содержание GraphicJet X Series
