Kortho GraphicJet X Series, Руководство пользователя

Страница: 49 / 178

INSTALLATION
H550 AE
Rev.: 001
kortho
KGJ X18
6-9
6.3.6 Axial printhead rotation
A B C
Fig. 6.14 Printhead axial rotation 0°, 45° and 90°, clamp down, reservoir position I,
mm x
gap
10

For some axial angles, the standard coding-unit support needs an extra shaft and pole clamp. Compare
example [A] with [B] and [C] of Fig. 6.14. At some angles, the reservoir mounting clamp must be fit to
reservoir position II or III instead of the standard I position (refer to
Fig. 6.6) because the two pole clamps can be in the way of each other.
First, set the
gap
x
(=10mm in Fig. 6.14). Look at the curves in the graph Fig. 6.16 for a height-AB at a given
axial rotation angle. Every curve in the graph Fig. 6.16 have their own
gap
x
and
clamp
y
values.
Fig. 6.15 Printhead axial rotation -45°, clamp up, reservoir position III,
mm x
gap
18
