54
Fast Ethernet Port 1~8 (fa1~fa8) : AutoNegotiation, 10M Full Duplex(10
Full), 10M Half Duplex(10 Half), 100M Full Duplex(100 Full) and 100M Half
Duplex(100 Half).
Gigabit Ethernet Port 9~10: (gi9~gi10) : AutoNegotiation, 10M Full
Duplex(10 Full), 10M Half Duplex(10 Half), 100M Full Duplex(100 Full),
100M Half Duplex(100 Half), 1000M Full Duplex(1000 Full), 1000M Half
Duplex(1000 Half).
The default mode is Auto Negotiation mode.
In
Flow Control
column, “Symmetric” means that you need to activate the
flow control function of the remote network device in order to let the flow
control of that corresponding port on the switch to work. “Disable” means
that you don’t need to activate the flow control function of the remote
network device, as the flow control of that corresponding port on the switch
will work anyway.
Once you finish configuring the settings, click on
Apply
to save the
configuration
.
Technical Tips: If both ends are not at the same speed, they can’t link with
each other. If both ends are not in the same duplex mode, they will be
connected by half mode
.
4.3.2 Port Status
Port Status shows you current port status.
.
The description of the columns is as below:
Port
: Port interface number.
Type
: 100TX -> Fast Ethernet port. 1000TX -> Gigabit Ethernet port.
Link
: Link status. Up -> Link UP. Down -> Link Down.
State
: Enable -> State is enabled. Disable -> The port is disable/shutdown.
