47
4.2.8 Factory Default
In this section, you can reset all the configurations of the switch to default
setting. Click on
Reset
the system will then reset all configurations to
default setting. The system will show you popup message window after
finishing this command. Default setting will work after rebooting the switch.
Figure- 4.2.8.1 The main screen of the Factory Default
Figure 4.2.8.2 Popup alert screen to confirm the command. Click on
Yes
to
start it.
Figure 4.2.8.3 Popup message screen to show you that have done the
command. Click on
OK
to close the screen. Then please go to
Reboot
page to reboot the switch.
Click on
OK.
The system will then auto reboot the device.
Note: If you already configured the IP of your device to other IP address,
