35
Figure 4.2.2.2 Popup alert window for Incorrect Username.
4.2.3 IP Configuration
This function allows users to configure the switch’s IP address settings.
Below figure is the UI of IP configuraation.
DHCP Client
: You can select to
Enable
or
Disable
DHCP Client function.
When DHCP Client function is enabled, an IP address will be assigned to
the switch from the network’s DHCP server. In this mode, the default IP
address will therefore be replaced by the one assigned by DHCP server. If
DHCP Client is disabled, then the IP address that you specified will be used
instead.
IP Address
: You can assign the IP address reserved by your network for
your JetNet. If DHCP Client function is enabled, you don’t need to assign
an IP address to the JetNet, as it will be overwritten by DHCP server and
shown here. The default IP is 192.168.10.1.
Subnet Mask
: You can assign the subnet mask for the IP address here. If
DHCP Client function is enabled, you don’t need to assign the subnet mask.
The default Subnet Mask is 255.255.255.0.
