background image

22

22

HARNESS WIRE CONNECTION GUIDE

      

     

      

   

Installation

Installation

3. /-)Trunk Unlock Programmable Output

(Optional)

        

This output is used to trunk unlock.

         If you change to (-) jumper 4 of the control box, orange wire will output (-).
         Additional Ignition output: If you change to ON 1-3 of the program menu,
                                                     orange wire will output at the remote start.
                                                     At this time you can't use trunk unlock output. 

CN2 5Pin Output Harness

      

1. White(+)Light Flash Output

        

This wire should be connected to the (+)parking light wire.

   

   

2. White(+)Light Flash Output

        

This wire should be connected to the (+)parking light wire.

CN1 6Pin Heavy Gauge Harness

 

   

 1. White(+)Starter Output

        

Connect this wire to the starter wire in the vehicle.

  

    

2. Black(-)Ground

        

Connect this wire to a clean, paint-free sheet metal location.(driver kick panel)

      

3. Blue(+)2nd Ignition Output

        

Connect the wire to the second ignition wire in the vehicle.

   

   

4. Green(+)IG3 Output

(Contemporary output with GRAY of the CN4)

        

This output can be used according to vehicles at the remote start.

         And this wire output after 1minute after remote start is operated.

      

5. Red(+)12V Constant Input

        

Must be connected to a high current source. Since the factory su)12V to the key 

         switch. That is used to operate the motor, it is recommended that these wire be connected
         there.

      

6. )Ignition Output

        

Connect this wire to the ignition wire in the vehicle.

- Please read this entire installation guide before the installation. 
- Do not disconnect the battery if the vehicle has the anti-theft-coded radio.
- Test all circuits with a high-quality digital multi-meter before making connections.
- Vehicle anti-theft systems(immobilizers) require a bypass module.
  The bypass module allows for easy interfacing, while still maintaining the OEM
  security system's integrity.

Содержание KR-8800

































Отзывы: