Kopel KR-8800, Руководство по эксплуатации и установке

Страница: 23 / 32

4-3 Door lock/unlock pulse for 3.5 seconds
When turned ON, door lock/unlock will be outputted for 3.5 seconds.
Default setting: 0.8 seconds
4-4 Bypass ON/OFF
When turned ON, if door/hood/trunk is sensed before arm delay time(P3-8),
the siren will output 3 chirps after arm delay time, and then inform to transmitter.
In the default setting, if door/hood/trunk is sensed before arm delay time(P3-8),
the siren will be outputted after arm delay time. (Default is bypass function OFF.)
4-5 Dome light is changed to armed output
When turned ON, dome light output(CN5 black wire)is changed to always output
during arming.
4-6 Smart access mode ON/OFF
When turned ON, LCD display ACCESS icon. And the main control unit sense
the transmitter when transmitter is near by vehicle, the system will be automatically
disarm (Unlock). If the transmitter is far from vehicle, the system will be arm.
If you use this function, the transmitter battery life will be short.
21 21
4-2 Automatic engine disable (Optional)
When turned ON, starter kill will be automatically outputted 30seconds after
ignition OFF with LED blink slowly.
Program Menu P-4 for Advanced Function Program Menu P-4 for Advanced Function
4-1 Siren pulse output
In the default setting, siren will be continually outputted for 30seconds when
alarm is operated. When turned ON : Siren will be outputted to pulse.
4-7 NC
4-8 Arm cancel mode at door open
When turned ON, if the door is open, arm is not operated by transmitter.
In this case, you can operate arm after closing the door.
(Only used by the install engineer)
(Only used by the install engineer)
Program Menu Program Menu