Kopel KR-8800, Руководство по эксплуатации и установке

Страница: 29 / 32

27 27
Installation Installation
CN9 2P Valet Switch (Optional)
CN10 2P LED Indicator (Optional)
The Valet button should be accessible from the driver's seat. It plug in to the CN 9 on the
side of the main control unit.(Normal valet function)
Mountain the LED indicator in a visible location such as dash or console.
Plug the LED into the control module.
2. Installation
1)4pin Cable: Connect to main control box.
2)Installation location: First of all, stick the sticker on the inside the windshield of the wheel,
and stick the control module on that sticker.
3)Sensitivity adjustment: If you turn the volume under the switch to the right, sensitivity of
knock will be more sensitive.(Normal location: Center)
4)Secret code reset: If you put on the 4pin cable again with press the switch, secret
CODE is changed to "1234".
Cn8 5P Receiver cable
Mounting the Receiver/Antenna
he best location for the receiver/antenna is centered on left of the front windshield.
The antenna should be mounted horizontally.
Metallic window tint can also affect range, so this should be a consideration when
determining the mounting location.
After determining the best mounting location, follow these steps:
1. Clean the mounting area with a quality glass cleaner or alcohol to remove
any dirt or residue.
2. Plug the 5 pin cable into the receiver/antenna.
3. Mount the receiver/antenna using the supplied double-sided tape.
4. Plug the receiver/antenna cable into the main control unit.