Kopel KR-8800, Руководство по эксплуатации и установке

Страница: 20 / 32

Program Menu P-1 for Start Function Program Menu P-1 for Start Function
1-1 Auto turbo timer program
When turned ON, this is function for maintain engine on for 2mins after the
door is locked. You can change the turbo time at program setting 3-7(17page).
(This is in use to aid function of the turbo vehicles.)
See 10page about the turbo function.
1-2 Door re-Lock after remote start (Only used by the install engineer)
When turned ON, door lock will be operated after engine turn off.
1-3 Trunk output change(At remote start) (Only used by the install engineer)
When turned ON, (+) will always output at the remote start.
1-4 LPG function setting (Optional)
When turned ON, the engine will turn off automatically within 30sec if LPG in
gas line is empty when the engine turn off.
See 8page about the LPG function.
(This function is operated when you install LPG gas valve ON/OFF relay.)
1-5 Auto reservation of stick vehicles
In the default setting, this function is start program of the stick vehicle.
See 6, 7 page about the reservation of stick shift vehicle.
1-6 Glow plug sensing for diesel engines (Only used by the install engineer)
When turned ON, starter motor is operated after glow plug is OFF at the remote
start. You must connect No.11 VIOLET wire of the connector CN 5.
1-7 Cold & hot start
When turned ON, engine automatically start if temperature become -20 C or
+50 C at the arm mode. You can change the cold start temperature at 3-4
.
This function is automatically off after total 8times operation.
This function will restart if transmitter become arm after disarm.
18 18
Program Menu Program Menu
1-8 IG2 output ON/OFF at the disarm (Only used by the install engineer)
When turned OFF, IG2 is OFF at the disarm during remote start.
This function prevent from short in key box when the ignition key is turned ON
during the vehicle remote start. In the default setting(ON), IG2 maintain ON.
(See 7page.Getting on the vehicle during remote start)