Safety
Instructions
Safety Instructions
Please read this chapter carefully and take note of the instructions for your own
safety and proper use of the device.
This chapter also contains information on certification and radio shielding for the
system.
Take note of the warnings and instructions on the device and in the manual.
The KISS 2U platform has been built and tested by Kontron Embedded
Computers in accordance with EN 60950/VDE 0805 and left the production plant
in a perfectly safe condition.
In order to maintain this condition and to guarantee safe operation, the user must
observe the instructions and warning notices contained in this manual.
❏
The device must be used in accordance with the instruction manual.
❏
The electrical wiring in the related rooms must meet the requirements of the
applicable regulations.
❏
Ensure that no cables, in particular power cables, are lying across the floors in
accessible areas, where people could fall over or get caught in them.
❏
Avoid using power cables in sockets with a large number of other devices. Do
not use extension cables.
❏
Only use the power cable supplied with the device.
❏
Do not position the device close to a heat source or in a damp place. Ensure
that the device has adequate ventilation.
❏
Only devices or components, which meet the requirements of a SELV circuit
(safety extra-low voltage) in accordance with EN 60950, should be connected
to the system ports.
❏
Switching off the device using the power on/off button does not disconnect the
computer from the power source. The device is only completely isolated from
the mains by disconnecting the mains power cable from the mains or from the
device.
For this reason, ensure that there is easy access to the mains power cable,
including its mains plug.
KISS 2U - User’s Manual (Version 1.01)
7
