Installation and Removal
Installation in a 19" Industrial Cabinet
Expansion card installation should be performed before installing
the KISS 2U-system into
panel.
Refer to the “Fehler! Verweisquelle konnte nicht gefunden
we
an industrial cabinet or into a control
rden.” section
ct your
peripherals to the corresponding system ports. You will find a
description of the ports, irrespective of the system configuration in
the
“Ex
Ports of the 986LCD-M/Flex Motherboard” chapters.
Before closing the industrial cabinet, you must conne
“External Ports of the SBC Cards (PCI-759/-760/-960)” or
ternal Ports of the 886LCD-M/Flex Motherboard” or “External
Important instructions!
The device must only be incorporated and installed by specialists
who are qualified in this field.
The KISS 2U should be installed in a 19" industrial cabinet using
slide rails.
Ensure that air flow around the device is adequate when installing
the KISS 2U.
Ensure that the air inlet and outlet openings are kept clear and
free from any obstructions.
Leave at least 5 cm (approx. 2”) of free space to the front and
rear of the KISS 2U when installing it from the 19" industrial
cabinet, in order avoid possible overheating.
KISS 2U - User’s Manual (Version 1.01)
37
