Installation and Removal
To install or remove an expansion card proceed as follows:
1.
Switch your system off and disconnect it from the mains power supply.
on the
cure the cards or the covering plate to the rear
2.
Loosen the knurled screws, which secure the cover on the front of the system.
3.
Pull the cover back and remove it.
4.
Place the expansion card in or pull it out of the PCI bay
backplane/motherboard and se
of the device.
5.
Close the device and secure the cover with the knurled screws.
Please read information provided by the manufacturer of any
expansion cards before installing them or removing them from
your system.
36
KISS 2U - User’s Manual (Version 1.01)
