Maintenance and Prevention
Re
ium battery.
o replace the lithium battery, proceed as follows:
1.
Open the device, as described in the “Installing Expansion Cards” chapter
(steps 1-3).
2.
If you have added expansion cards to your system, first remove the expansion
cards plus all the corresponding connecting cables, to gain access to the
lithium battery.
outwards.
4.
Place a new lithium battery in the battery h
5.
When doing this, pay attention to the polar
the top).
Kontron Embedded Computers.
re-attach the connecting cables.
Installing Expansion Cards” chapter
placing the Lithium Battery
The motherboard or SBC card for your system is equipped with a lith
T
3.
Remove the lithium battery from the holder by pulling the ejector spring
older.
ity of the battery (the plus should be
at
6.
The lithium battery must only be replaced with the same type of battery or with
a type of battery recommended by
7.
Re-position the expansion cards and
8.
Close the device, as described in the “
(step 5).
Do not dispose of lithium batteries in general trash collection.
according to the local regulations dealing
hese special materials, (e.g. to the collecting
Dispose of the battery
with the disposal of t
points for dispose of batteries).
KISS 2U - User’s Manual (Version 1.01)
47
