Installation and Removal
Accessing Internal Components
at you must read before accessing
e procedures properly when
Installing Expansion Cards
Please consider following instruction when you install (or remove) expansion
cards.
This section contains important information th
the internal components. You must follow thes
handling any boards or replacing the fan slide in module.
The installation and removal of expansion cards have
KISS 2U - User’s Manual (Version 1.01)
35
with the description in this manual.
to be
carried-out only by qualified specialist personnel in accordance
Before removing the device cover, ensure that your system is
tional cards, please
n specified in the
“Technical Data” chapter and that each additional card does not
exceed 25 W power consumption.
switched off and disconnected from the mains power supply.
When expand your system with addi
observe the power consumption specificatio
Please refer to the ESD safety procedures for handling
assemblies with static sensitive devices.
Failure to take heed of this warning instruction can result in
damage to the device.
Please read information provided by the manufacturer of any
expansion cards before installing them or removing them from
your system.
