Product
Description
Fan Slide-In Module and Temperature Sensor
The three system fans are securely installed in a user-friendly, interchangeable
fan-slide-in module (Hot-Swap). The fan slide-in module is mounted in the fan
compartment on the front of the device.
The systems fans are temperature-controlled via the temperature sensors which
are built in the system. Thus sufficient airflow is ensured for an optimal, active
cooling of the system.
The operation of the KISS 2U platform is permitted only with a
functional fan slide-in module (refer to the “Replacing System Fans”
section).
Defective components may be replaced only by Kontron original
spare parts.
❏
part number of the fan slide-in module: 1009-1642
Side View
On the left and right sides of the device, there are four M4 threaded screw holes,
for installing the KISS 2U platform in a 19" industrial cabinet using slide rails [not
included; refer to the chapter “Slide Rails (Option)”.]
Fig. 18: Threaded screw holes (M4) for attaching slide rails
1
Side view of the KISS 2U platform 2
4x M4 threaded screw holes (on
both sides)
2
1
KISS 2U - User’s Manual (Version 1.01)
31
