Starting
Up
Starting
Connecting the Power Cable and Switching On
The AC mains
S 2U.
Up
input socket is located on the back of the KIS
The power source voltage must match the voltage on the type
lable.
Fig. 21: KISS 2U (here with an SBC card and a wide range AC power supply unit)
Fig. 21a: KISS 2U (here with a motherboard and a wide range AC power supply unit)
To connect the power cable, proceed as follows:
1.
Plug the AC power cord into the system’s AC power socket.
2.
Plug the other end of the AC power cord into a corresponding power outlet.
3.
Turn the device ON via the ON/OFF switch of the power supply unit located at
the rear of the system.
AC power socket and power switch
AC power socket and power switch
Use a power cord suitable for the mains power supply in your
country.
Make sure that the mains power supply (power outlet) is properly
grounded and that the power cord is in perfect condition without
any visible damage. An ungrounded mains power supply is not
permissible.
KISS 2U - User’s Manual (Version 1.01)
39
