Konica Minolta SU-501, Руководство пользователя

Страница: 288 / 306

9
Troubleshooting
9-10 bizhub 350/250 (Phase 2.5)
The message "Failed
to connect to ma-
chine" appears. The machine has not been
turned on. Turn on the machine.
The device IP address entered
in IP Scanner is incorrect. Correct the IP address.
The TCP/IP setting for the
computer is incorrect. Check the network settings on the
computer.
Use of TCP/IP from this ma-
chine has been prohibited. Check with the administrator of the
machine.
The computer is not connect-
ed to a network. Check the network connections for the
computer.
The LAN cable is not connect-
ed. Check that the LAN cable is correctly
connected.
Although SSL settings are en-
abled, no certificate is in-
stalled. Install a certificated. For details, refer
to the User manual [Network Scanner
Operations].
Although SSL settings are en-
abled, a version of Internet Ex-
plorer that is earlier than 5.0 is
used. Use Internet Explorer 5.0 or later.
Although SSL settings are en-
abled, the encryption level for
Internet Explorer is less than
56 bits. Obtain the encryption pack from the
Microsoft Web site and install it.
A Security Alert message ap-
pears. Install a certificate.
The message "Con-
nection Failure with
ImageReceiver. Do
you want to start up
ImageReceiver?" ap-
pears. ImageReceiver was not start-
ed. Start ImageReceiver.
ImageReceiver is not operat-
ing correctly. Restart the computer.
2
Reminder
When turning the machine off,
then on again with the main
power switch, wait about 10
seconds to turn the machine
on after turning it off. The ma-
chine may not operate cor-
rectly if it is turned on
immediately after being
turned off.
The message "Im-
ageReceiver detect-
ed of XXX" appears. Other software is using this
port. • The mail server and IP Scanner can-
not be used together. Do not start
up the mail server. In addition, if oth-
er software is the cause, exit the
software that is causing the prob-
lem.
• Follow the instructions to change
the port.
Problem Cause Remedy