Konica Minolta SU-501, Руководство пользователя

Страница: 270 / 306

8
Specifying management settings
8-26 bizhub 350/250 (Phase 2.5)
Specifying settings to limit the use of communication modes–1
(mode 475)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
2
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not
normally be displayed.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side indicate the page numbers with
descriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page Refer-
ence
7 Specifies whether or
not the use of
TCP/IP is prohibit-
ed. 0 Permitted ----------
1 Prohibited
6 Specifies whether or
not the use of LPD is
prohibited. 0 Permitted ----------
1 Prohibited
5 Specifies whether or
not the use of a
RAW port is prohib-
ited. 0 Permitted ----------
1 Prohibited
4 Specifies whether or
not the use of SLP is
prohibited. 0 Permitted ----------
1 Prohibited
3 Specifies whether or
not the use of a
Scan to FTP is pro-
hibited. 0 Permitted ----------
1 Prohibited