Konica Minolta Fax 9930 Скачать руководство пользователя страница 52

Страница: 52 / 249

User’s Manual

Connecting Optional External Devices

Handset

If you purchased an external handset option with your fax
machine, follow these instructions to install it.

1 Plug in one end of the handset cord into the handset and

the other end into the jack on the front of the cradle. Place
the handset in the cradle.

2 Insert the supplied telephone cord into the jack located on

the back of the cradle.

3 Insert the end of the cord into the TEL jack on the back of

the fax machine.

The two TEL jacks are provided to allow you to connect
both an external handset and an answering machine.

Telephone

Important: Any external telephone or answering
machine connected to your fax machine must be FCC
(US) or CSA (Canada) approved.

1 Insert one end of the telephone cord into the TEL jack on

the back of the fax machine.

2 Insert the other end into the jack in your external device.

Содержание Fax 9930


























































































































































































































































Результаты поиска

Содержание Fax 9930

Отзывы:

Konica Minolta Fax 9930, Руководство пользователя, Страница: 52 / 249

Результаты поиска

Содержание Fax 9930

Отзывы: