manualshive.com logo in svg

Konica Minolta Fax 9930, Руководство пользователя, Страница: 49 / 249

Поделиться
Скачать
Konica Minolta Fax 9930 Скачать руководство пользователя страница 49

|

Konica FAX 9930

34

Installing the Toner Cartridge

1 Lift out the toner well cover and discard.

!

Warning: Be careful when handling the toner cartridge.
Do not let toner spill onto your clothing or other porous
materials. If you experience any problems with toner,
see the Safety guides at the beginning of this section.

!

Important:  This machine will only operate using toner
cartridges specified by Konica for this facsimile
machine. The use of any other toner will result in the
display of an operation error and in machine
malfunction.

2 Unwrap the toner cartridge and gently shake it to

distribute the toner. 

 

Then carefully peel the tape from the

bottom of the toner cartridge.

    

    

3 Holding the toner cartridge with the bottom down, insert

the left side into the toner well, placing it under the tab
(a).

a

Содержание Fax 9930


























































































































































































































































Отзывы:

Нет отзывов