manualshive.com logo in svg

Konica Minolta Fax 9930, Руководство пользователя, Страница: 131 / 249

Поделиться
Скачать
Konica Minolta Fax 9930 Скачать руководство пользователя страница 131

|

Konica FAX 9930

116

Programming Personal (Confidential)
Mailboxes

Speed access no. 04.

A personal (confidential) mailbox (or sub-address number) is
the secured memory of a machine.

An address and password are used to access the personal
mailbox.  For your machine, the address is the number (1 to
16) of the mailbox.

Your machine can be programmed to manage 16 personal
mailboxes.

When set up, each mailbox is opened as a Confidential
Mailbox or Bulletin Polling Mailbox.

•

Confidential

•

Bulletin Polling (See Bulletin Polling)

Messages stored in a mailbox will not printed until the
correct password is entered.

!

Be sure to record both the address and password of
each confidential mailbox.  Keep the record in a safe
place.  If you forget a password, you will need to
contact an Authorized Konica Dealer

!

The Mailboxes (numbers 1 to 16) are used for both
Personal (Confidential) Mailboxes and Memory Polling
(Bulletin).  If you are using both features, remember
that the number of available mailboxes is shared by the
two functions.

Содержание Fax 9930


























































































































































































































































Отзывы:

Нет отзывов