Konica Minolta Fax 9930 Скачать руководство пользователя страница 177

Страница: 177 / 249

Konica FAX 9930

162

Activity Report

This report provides a record of your machine’s last 30
communications. Information provided on this report
includes:

•

The total amount of time your machine spent sending
faxes and the total amount of time spent receiving faxes.

•

The date, time and duration (S,R-TIME) of each
transmission or reception.

•

The name or telephone number of the fax machine you
were communicating with (DISTANT STATION ID).

•

The communication mode used.

•

The number of pages.

•

The result.

•

Service codes.

Printing the Activity Report

The Activity Report automatically prints after your
machine completes 30 communications.

Press Menu/Exit to enter the menu.

Press

to select

Report Print

, press Enter.

Press

until the report you want appears on the

display. Press Enter.

Print all the reports you want, then press Menu/Exit to
return to standby mode.

Содержание Fax 9930


























































































































































































































































Результаты поиска

Содержание Fax 9930

Отзывы:

Konica Minolta Fax 9930, Руководство пользователя, Страница: 177 / 249

Результаты поиска

Содержание Fax 9930

Отзывы: