manualshive.com logo in svg

Konica Minolta Fax 9930, Руководство пользователя, Страница: 211 / 249

Поделиться
Скачать
Konica Minolta Fax 9930 Скачать руководство пользователя страница 211

|

Konica FAX 9930

196

Display Panel Messages

This section lists the status and error messages that may
appear on your machine’s display panel, and explains what
they mean and how to correct any problem they indicate.

Normal Display in Standby Mode

Under normal operating condition, information is displayed
on the top and bottom lines of the display.

The top line shows the time and the answering mode.

Answering modes options are:

FAX, TEL, PC, T/F or TAD.

The bottom line shows the amount of memory available.

Error Messages

14:14: FAX

COVER OPEN

Cover open: The upper cover is not closed. First check to be
sure that the image drum is seated correctly and the toner
cartridge is installed properly. Then, check to see that the
toner cartridge lock lever is pushed completely forward until
it stops. Press down firmly on the cover to make sure it is
closed and latched.

NO PAPER
CHECK PAPER SUPPLY

The paper tray is out of paper. Add more paper.

Содержание Fax 9930


























































































































































































































































Отзывы:

Нет отзывов