manualshive.com logo in svg

Konica Minolta Fax 9930, Руководство пользователя, Страница: 154 / 249

Поделиться
Скачать
Konica Minolta Fax 9930 Скачать руководство пользователя страница 154

|

User’s Manual

139

Memory Polling (Bulletin)

In Memory Polling (Bulletin), the document to be polled is
saved to a Confidential Mailbox.

Several remote machines can contact your machine and
request the document.

You may also load several documents.

Memory Polling (Bulletin) allows for repeat polls.  The
remote machines can contact your machine and have the
document(s) sent again and again.

Memory Polling (Bulletin) allows you to use your machine
as a fax back system.

!

The Mailboxes (numbers 1 to 16) are used for both
Personal (Confidential) Mailboxes and Memory Polling
(Bulletin).  If you are using both features, remember
that the number of available mailboxes is shared by the
two functions.

Memory Polling (Bulletin) allows any number of remote
machines to contact your machine.  The remote
machines can retrieve the document as many times as
needed.

Memory Polling (Bulletin) is designed to be repeated,
by multiple remote machines.

Содержание Fax 9930


























































































































































































































































Отзывы:

Нет отзывов