Konica Minolta DRYPRO Model 793, Руководство по эксплуатации

Страница: 71 / 156

Ch.4 Maintenance Mode
< 69 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
2
Touch the [PRINT SETUP] button of the "Main-
tenance" screen.
3
Touch the [PRINT CONDITION] button.
- "CH SELECT" screen will be displayed.
- Touching the [RETURN] button will cancel the Mainte-
nance Mode, and return to the Normal screen.
3
4
Scroll the page with the [SCROLL] buttons, and
display the button for the input device for which
the print condition should be set.
5
4
6
6
Touch the arrow buttons [
t
], [
s
] to select the
the LUT that should be applied.
- Selected LUT No.. and name will be displayed between
the arrow buttons [
t
], [
s
].
5
Touch the button for the input device for which
the print condition should be set.
- "PRINT CONDITION" screen will be displayed.
- Channel No.. and name of the input device selected in
the step 5 will be indicated at the upper left of each
"Print Condition" page.
- Touching the [RETURN] button will return to the "Main-
tenance Mode (PRINT SETUP)" screen.
1
Switch to the Maintenance Mode.
p.52 Switching to
the Mainte-
nance Mode
7
7
Touch the arrow buttons [
t
], [
s
] to select the
the Density to be applied.
- Touch the left arrow [
t
] button to decrement the value
by one, and to decrease the density of the image.
- Touch the right [
s
] button to increment the value by
one, and to increase the density of the image.
- Set the value between "-7" ~ "+7".
8
8
Touch the arrow buttons [
t
], [
s
] to select the
the Contrast to be applied.
- Touch the left arrow [
t
] button to decrement the value
by one, and to decrease the contrast of the image.
- Touch the right [
s
] button to increment the value by
one, and to increase the contrast of the image.
- Set the value between "-7" ~ "+7".
p.73 LUT SETUP