manualshive.com logo in svg

Konica Minolta DRYPRO Model 793, Руководство по эксплуатации

Поделиться
Скачать
Konica Minolta DRYPRO Model 793 Скачать руководство пользователя страница 132

Ch.6 Troubleshooting

< 130 >

DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1

5

When the leading edge of the jam film can be

located, insert your hand, and remove the jam

film.

- If the leading edge of the jam film cannot be located by

being caught between the rollers, proceed to the step
6.

Animation of jam

release in the Cooling

Unit.

6

Insert your hand, and send the jam film toward

the transport section.

4

Pull out the Deodorant Filter Case.

- Hold and slightly lift the handle (green) at the front of

the Deodorant Filter Case by your left hand, and pull it.

- Hold the handle (green) at the top of the Deodorant Fil-

ter Case by your right hand, and pull it out.

Do not touch the Deodorant Filter Housing

(yellow) when pulling out the Deodorant Filter

Case. It may be heated 100

:

or higher, and

you may get burned.

Do not touch the HPRO Unit when removing

the jam film. It may be heated 100

:

or higher,

and you may get burned.

Содержание DRYPRO Model 793





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды