Konica Minolta DRYPRO Model 793, Руководство по эксплуатации

Страница: 41 / 156

Ch.3 Operation
< 39 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
Reaction to the case that the [Film Set] button does not dissapear despite the
film is loaded.
- When the Supply Tray was pushed back into the Main Unit and locked without cut-
ting the front edge of the film package, the [Film Set] button will be displayed again.
("0" is displayed for film sheets)
Touch the [Film Set] button again to pull out the Supply Tray again, and cut the
edge of the package.
- The [Film Set] button will be displayed again in the case that the film package is not
correctly wounded (rear edge of the film package is not correctly caught on the
winding shaft) or pick-up of the first film failed. Repeat the film loading again. When
the rear edge of the film package is not correctly caught on the winding shaft, retry
to set the film package on the winding shaft only after taking appropriate measures
not to expose the film to the light by, for example, sealing the cut edge of the film
package with an adhesive tape, etc.