manualshive.com logo in svg

Konica Minolta DRYPRO Model 793, Руководство по эксплуатации

Поделиться
Скачать
Konica Minolta DRYPRO Model 793 Скачать руководство пользователя страница 126

Ch.6 Troubleshooting

< 124 >

DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1

6-1 Error Message and Reaction

When an error occurs on the DRYPRO 793, corresponding error code and error message will be displayed in the
message column of the Operation Panel. Errors displayed on the DRYPRO 793 and reaction to be taken are listed
below. 

Error Code

Error Message

Error Descriptions

Reset

E4110

Film pickup error.

Failed to pick up in Tray1.

Refer to "Film Jam in the Supply Tray".

Press release button and follow the direction provided. Press [Error Reset] button, follow the instruction.

E4111

ID_ERR_MEC1_FILMJAM

Film jam in Descent Transport Unit.

Refer to "Film Jam in the Descent Transport Unit".

Press the release button and remove the film.

E4125

ERR_MEC1_TRAY1OPEN

Supply Tray1 is open

Close the Supply Tray, and perform Error Reset.

Close the tray and press the release button.

E4140

ID_ERR_MEC1_SORTERFAIL

Incorrect film size in Tray1. 

Load the 14in film in the Supply Tray, and 

Confirm the setting and press the release button.

(10in or 8in film loaded in 14in tray)

perform Error Reset.

E4141

ID_ERR_MEC1_SORTERFAIL

Incorrect film size in Tray1. 

Load the 10in film in the Supply Tray, and 

Confirm the setting and press the release button.

(Film other than 10in loaded in 10in tray)

perform Error Reset.

E4142

ID_ERR_MEC1_SORTERFAIL

Incorrect film size in Tray1.

Load the 8in film in the Supply Tray, and

Confirm the setting and press the release button.

(Film other than 8in loaded in 8in tray)

perform Error Reset.

E4210

FILM PICKUP ERROR.

Pickup failed in Tray2.

Refer to "Film Jam in the Supply Tray".

Press release button and follow the direction provided.

E4211

ID_ERR_MEC1_FILMJAM

Film jam in Descent Transport Unit.

Refer to the "Film Jam in the Descent Transport Unit.

Press the release button and remove the film.

E4225

ID_ERR_MEC1_TRAY2OPEN

Supply Tray2 is open.

Close the Supply Tray, and perform Error Reset.

Close the tray and press the release button.

E4240

ID_ERR_MEC1_SORTERFAIL

Incorrect film size in Tray2. 

Load the 14in film in the Supply Tray, and 

Confirm the setting and press the release button.

(10in or 8in film loaded in 14in tray)

perform Error Reset.

E4241

ID_ERR_MEC1_SORTERFAIL

Incorrect film size in Tray2. 

Load the 10in film in the Supply Tray, and 

Confirm the setting and press the release button.

(Film other than 10in loaded in 10in tray)

perform Error Reset.

E4242

ID_ERR_MEC1_SORTERFAIL

Incorrect film size in Tray2.

Load the 8in film in the Supply Tray, and

Confirm the setting and press the release button.

(Film other than 8in loaded in 8in tray)

perform Error Reset.

E4310

FILM PICKUP ERROR.

Pickup failed in Tray3.

Refer to "Film Jam in the Supply Tray".

Press release button and follow the direction provided.

E4311

ID_ERR_MEC1_FILMJAM

Film jam in Descent Transport Unit.

Refer to "Film Jam in the Descent Transport Unit".

Press the release button and remove the film.

E4325

ID_ERR_MEC1_TRAY3OPEN

Supply Tray3 is open

Close the Supply Tray, and perform Error Reset.

Close the tray and press the release button.

E4340

ID_ERR_MEC1_SORTERFAIL

Incorrect film size in Tray3. 

Load the 14in film in the Supply Tray, and 

Confirm the setting and press the release button.

(10in or 8in film loaded in 14in tray)

perform Error Reset.

E4341

ID_ERR_MEC1_SORTERFAIL

Incorrect film size in Tray3. 

Load the 10in film in the Supply Tray, and 

Confirm the setting and press the release button.

(Film other than 10in loaded in 10in tray)

perform Error Reset.

E4342

ID_ERR_MEC1_SORTERFAIL

Incorrect film size in Tray3.

Load the 8in film in the Supply Tray, and

Confirm the setting and press the release button.

(Film other than 8in loaded in 8in tray)

perform Error Reset.

E4410

ID_ERR_MEC1_FILMJAM

Film jam in Descent Transport Unit.

Refer to "Film Jam in the Descent Transport Unit".

Press the release button and remove the film.

E4411

ID_ERR_MEC1_FILMJAM

Film jam in Descent Transport Unit.

Refer to "Film Jam in the Descent Transport Unit".

Press the release button and remove the film.

E4412

ID_ERR_MEC1_FILMJAM

Film jam in Descent Transport Unit.

Refer to "Film Jam in the Descent Transport Unit".

Press the release button and remove the film.

E4420

ERR_MEC1_OPEFAIL

In process of returning the Justification Motor to HP,

Refer to "Film Jam in the Descent Transport Unit".

Press the release button and check film path.

Justification Home Sensor was not activated.

Note : Film jam is suspected as the cause.

E4421

ERR_MEC1_OPEFAIL

In process of returning the Justification Motor to Limit Pos,

Refer to "Film Jam in the Descent Transport Unit".

Press the release button and check film path.

Justification Limit Sensor was not activated.

Note : Film jam is suspected as the cause.

E4422

ERR_MEC1_OPEFAIL

In process of releasing the Positioning Nip, 

Refer to "Film Jam in the Descent Transport Unit".

Press the release button and check film path.

Positioning Nip Sensor was not activated.

Note : Film jam is suspected as the cause.

E4423

ERR_MEC1_OPEFAIL

In nip process of the Positioning Nip, 

Refer to "Film Jam in the Descent Transport Unit".

Press the release button and check film path.

Sensor was not activated.

Note : Film jam is suspected as the cause.

E4424

ERR_MEC1_OPEFAIL

In process of releasing the Descent Nip, 

Refer to "Film Jam in the Descent Transport Unit".

Press the release button and check film path.

Descent Nip Sensor was not deactivated. 

Note : Film jam is suspected as the cause.

E4425

ERR_MEC1_OPEFAIL

In nip process of the Descent Nip,

Refer to "Film Jam in the Descent Transport Unit".

Press the release button and check film path.

Descent Nip sensor was not activated.

Note : Film jam is suspected as the cause.

Содержание DRYPRO Model 793





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды