Konica Minolta DRYPRO Model 793, Руководство по эксплуатации

Страница: 30 / 156

Ch.3 Operation
< 28 >
DRYPRO Vstage MODEL 793 Operation Manual Ver.1.01 2005.1
3-1 Operation Panel
The operation, control and settings of this device can be made by using the control panel located on the main unit.
The following shows the operating procedures.
1) Message Column
3) Job Info.
2) Loaded Film Info.
4) Status Info.
6) [Menu] Button
5) [Start Timer] Button
1) Message Column : Displays the status of the DRYPRO 793.
Warming Up Warming up
Ready Ready for print
Printing In printing process
Error Error occurred
Error Reset Error in reset process
Maintenance Servicing in Maintenance Mode
Web User Busy Accessed by Web user
2) Displays film type, size, number of remaining films in the Tray 1, 2, 3.
Display changes as follows when the film is empty.
Touching the area where "Film Set" is displayed initiates the film loading sequence.
Display changes as follows when the density calibration is required.
(Note : depending on the calibration settings)
Touching the area where "Calibration" is displayed initiates the automatic density
calibration.
3) Job Info. : Copy Count at present waiting for printout.
Queues The number of jobs waiting for printout.
Print Count Count of jobs in printing and unprinted.
p.35 FILM
LOADING
Size Film Type Remaining
14x17 B (blue) SD-P) 0-126
14x14 C (clear) (SD-PC)
11x14 M (mammo) (SD-PM)
10x12
8x10