Konica Minolta bizhub 601, Руководство пользователя

Страница: 151 / 538

751/601 2-74
Basic copy operations 2
*1
Foolscap includes the following 4 types: 8-1/8 × 13-1/4 w , 8-1/4 × 13 w , 8-1/2 × 13 w , 8 × 13 w , one of
which can be selected. For details, contact the service representative.
*2
Can be used only with Finisher FS-610.
!
Detail
When manually performing the hole-punching operation from the post inserter control panel, only two
holes can be punched.
Names of control panel parts
Finishing
1
Load the paper into the lower tray of the post inserter.
– If the "Corner" or "2 Position" Staple settings are to
be used, load the paper face up
– If a Punch setting is to be used, load the paper face
up.
– If the paper is to be stapled and folded at the center,
load the paper so that the side that is to be the front
when bound is face up.
– If the paper is to be folded in three, load the paper so
that the side that is to be the outside when folded in
three is face up.
– The loaded paper will be finished into one set.
Center Staple &
Fold
*2
Plain paper (16 lb to
21-1/4 lb) Standard sizes:
11 × 17
w , 8-1/2 ×
14 w , 8-1/2 × 11 w ,
A3 w , B4 w , A4 w ,
8K w , wide paper
(11 × 17W w , 8-1/2
× 11W w , A3W w ,
B4W w , A4W w )
20 sheets (16 lb to
21-1/4 lb)
16 sheets (21-1/2 lb
to 24 lb) Booklet tray
Tri-Fold
*2
Plain paper (16 lb to
24 lb) 8-1/2 × 11 w , A4 w ,
16K w
3 sheets (16 lb to
21-1/4 lb)
1 sheet (21-1/2 to 24
lb) Booklet tray
Paper weight Paper size Number of sheets Output tray
Corner Staple
2 Position Staple
Center Staple & Fold
Tri-Fold
[Punch] key
[Finishing] key
[Start/stop] key