Konica Minolta 8020, Инструкция по эксплуатации

Страница: 34 / 212

4.1 Components and Their Functions 4
Konica 8020/8031 4-3
Pa
rt
N
a
m
e
s an
d
T
h
ei
r F
u
nc
ti
o
n
s
Chap
ter
4
No. Part Name Description
8 Platen Cover CV-131
(optional) Presses down on the loaded document to keep it in place.
Referred to as the
platen cover
throughout the manual.
9 Duplex Unit AD-231
(optional) Turns over copies, allowing double-sided copies to be made
automatically.
• If a printer controller (Fiery X3e 31C-M) and the duplex unit
are installed on the Konica 8020, the memory must be
expanded. If the optional memory is not installed, automatic
double-sided copying cannot be performed.
Referred to as the duplex unit throughout the manual.
10 Paper Feed Unit
PF-232 (optional) A paper drawer that can supply 500 sheets of paper; up to two
paper feed units can be installed.
Referred to as the
paper feed unit throughout the manual.
11 Copy Table DK-134
(optional) A paper feed unit can stand on the copy table, and then the
printer can be set up on the top.
By setting the printer on the copy table, the printer can be
placed on the floor instead of on a desk, keeping the entire
surface of the desk free.
Referred to as the
copy table throughout the manual.
12 Finisher FS-231 (optional) Finishes copies according to the selected Output setting
(sorting, stapling, hole-punching or booklet binding), then feeds
out the pages.
• The hole-punching function is only available if the optional
punch kit (PK-131) is installed onto finisher FS-231. If the
finisher is installed, the printer must be installed on the copy
desk, on the large capacity tray or over a paper feed unit
combined with the copy table.
13 Copier Stand DK-232
(optional) Reduces the installation area required for the equipment if the
scanner is installed on the top of the stand and the printer is
installed on the inside.
Referred to as the
copier stand throughout the manual.
8
12
9
10
11
13