Konica Minolta 8020, Инструкция по эксплуатации

Страница: 33 / 212

4 4.1 Components and Their Functions
4-2 Konica 8020/8031
Pa
rt
N
a
m
e
s an
d
T
h
ei
r F
u
nc
ti
o
n
s
Chap
ter
4
4.1 Components and Their Functions
No. Part Name Description
1 Duplexing Document Feeder
DF-332 (optional) Automatically feeds and scans one document sheet at a time,
and automatically turns over double-sided documents and
scans them.
Referred to as the
duplexing document feeder throughout the
manual.
2 Scanner SN-232 Scans the document.
Referred to as the
scanner throughout the manual; in addition,
the combination of the scanner and the printer is referred to as
the
copier
.
3 Copier printer section Prints the image scanned with the scanner.
Referred to as the
printer throughout the manual; in addition,
the combination of the scanner and the printer is referred to as
the
copier .
4 Copy Desk DK-133
(optional) The printer can stand on the copy desk.
By setting the printer on the copy desk, the printer can be placed
on the floor instead of on a desk, keeping the entire surface of
the desk free.
Referred to as the
copy desk throughout the manual.
5 Large Capacity Tray
DB-432 (optional) A paper drawer that can supply 2,500 sheets of paper.
Referred to as the
large capacity tray throughout the manual.
6 Finisher FS-135 (optional) Finishes copies according to the selected Output setting
(sorting or stapling), then feeds out the pages.
• If the finisher is installed, the printer must be installed on the
copy desk, on the large capacity tray or over a paper feed
unit combined with the copy table.
7 Option Tray FT-331
(optional) If finisher FS-135 is installed, the number of paper output trays
can be increased.
2
6
7
1
3
5
4