Kongsberg Seatex AIS 100, Инструкция по эксплуатации

Страница: 89 / 113

Seatex AIS 100 Instruction Manual, rev. 5 External interfaces
81
In the Cook Islands at 1500 local time on June 10, 1995:
$GPZDA,013000,11,06,1995,10,30*4A<CR><LF>
All fields except Local zone, are used by the AIS.
6.7 Proprietary 61162-1 sentences
General
In order to configure and service the AIS mobile station there are
some proprietary messages that can be used. The AIS mobile station
uses the NMEA registered "
STX " manufacturer’s code. When setting
parameters in the AIS mobile station use the $PSTXS command. To
query the AIS mobile station for information, use the $PSTXQ
command. Responses from the AIS mobile station uses the
$PSTXR
command. The proprietary messages comply with IEC 61162-1 and
have the following structure:
$ P STX S , <Msg ID> DATA * <FCS> <CR> <LF>
Field Definition
$ or ! Hex 24 or Hex 21 - Start of sentence
P Hex 50 – Proprietary sentence ID
STX Kongsberg Seatex mnemonic code
S or R or Q S = Set, R = Response, Q = Query
<Msg ID> Message ID identifying a specific sentence
DATA Data portion, unique for each Message ID.
* Checksum delimiter
<FCS> Checksum
<CR><LF> End of message
MSI number
To request the current MMSI number from the AIS mobile station, use
the command:
$PSTXQ,MMSI*<FCS><CR><LF>
The AIS mobile station response message has the format:
$PSTXR,MMSI,<nnnn>*<FCS><CR><LF>
To set or change the MMSI number, use the command:
$PSTXS,MMSI,<nnnn>*<FCS><CR><LF>