Kongsberg Seatex AIS 100, Инструкция по эксплуатации

Страница: 29 / 113

Seatex AIS 100 Instruction Manual, rev. 5 Display pages
21
3.1.12 Security
=== Security ======== P1C
Authorisation
L1 PIN Code :*******
L2 PIN Code :*******
Nav.Status :0
Voyage Data :0
Static Data :0
Chn.Mgmt :1
VHF Link :1
Serial Ports :1
Netw.Settings :1
Answer Mode :0
The Security page contains authorisation setup for
the mobile station. There are two authorisation
code levels. On this page the PIN codes can be set
and a number of menu pages can be protected
against unauthorised change. PIN codes, see
chapter 7. The Level 2 PIN code (L2) is valid on
all pages requiring L1 authentication
1
. The
possible levels are:
0
No authorisation code
1 Use L1 or L2 PIN code
2 Use L2 PIN code
All entries on this page are protected by L2 PIN
code.
3.2 Authorisation code entry
This page will appear when modifying data protected by the security
page.
========================
Enter authorisation code
PIN: **
========================
ABCDEFGHIJKLMNO
PQRSTUVWXYZ1234
567890.,!\”@
<<<<← ← ← ←↵ ↵↵ ↵
In order to enter the Authorisation code use the
WHEEL to select symbols and confirm each input
using the ENTER button. When all symbols in the
authorisation code have been input, select the
↵ ↵↵ ↵
symbol (confirming to the system that the last
symbol within the authorisation code has been
entered) and finally press the ENTER button.
1
Once authenticated with L1 or L2 PIN code, the authentication is valid until the View page has been displayed
for 5 seconds or more. To protect the AIS security systems, the MKD returns to the View page when not used
for 15 minutes or more. In high security applications we recommend manually returning to the View page for 5
seconds or more when the change that required authentication is completed.