19
3
Remove the ID0 (Red)
2-5 Low Head
Tapping Screw
Servo Case Screw
(2-24 Low Head Tapping Screw)
Remove the servo for the head ID0(Red)
by removing the screws.
4
Replace cable for ID1 (Blue)
Replace the ZH Connection Cable B (ZH/Servo)
100mm attached to the ID1(Blue) with the ZH
Connection Cable A (ZH/ZH) 300mm included in
this Conversion set.
R e p l a c e t h i s c a b l e w i t h t h e Z H
Connection Cable A (ZH/ZH) 300mm�
Disassembly of the robot
