Komatsu WA320-5H, Руководство по эксплуатации и техническому обслуживанию

Страница: 282 / 321

ATTACHMENTS, OPTIONS
MACHINE MONITOR WITH LOAD METER
6-35
12. The “0“ at the 10 ton position must be changed to “3“, so
press the (>) or (<) of monitor panel mode selector switch 2
to change to “3“, then press the (
) of monitor panel selec-
tor switch 1.
“3“ is selected and the cursor moves to the 1 ton position.
13. “0“ is already displayed at both the 1 ton and 0.1 ton posi-
tions, so press the ( ) of monitor panel selector switch 1
twice.
“0.0“ is selected and 30 tons is set as the target load.
REMARK
If 0 tons is input as the target load, it is not accepted. The buzzer gives a long sound and the mode changes to
give the addition mode display.
14. This completes the setting of the remain mode.
The character display returns to the normal service meter
and time display.
Once the setting has been made, even if the starting switch
is turned OFF and operations are stopped, the setting is
retained. When operations are started again, there is no
need to carry out the setting again. All further loads will be
subtracted from the total load recorded before operations
were stopped.