Komatsu WA320-5H, Руководство по эксплуатации и техническому обслуживанию

Страница: 109 / 321

EXPLANATION OF COMPONENTS
OPERATION
3-50
AIR CONDITIONER SWITCH
This switch (2) is used to start or stop the cooling or dehumidi-
fying function.
When the fan switch is turned ON and the air conditioner
switch is pressed, the indicator lamp above the switch lights up.
When the switch is pressed again, the switch is turned OFF
and the indicator lamp goes out.
MODE SELECTOR SWITCH
This switch (3) is used to select the vents.
The following five vent modes are available: FACE, FACE/
FOOT, FOOT, FOOT/DEF, DEF.
When the switch is pressed, the indicator lamp above the
switch lights up to display the vent mode.
FRESH/RECIRC SELECTOR SWITCH
This switch (4) is used to select between recirculation of the air
inside the cab or intake of fresh air from outside.
When the switch is pressed, indicator lamp (A) at the top of the
switch lights up.
Recirculation of air inside cab
Press this switch (B) to use only the air inside the cab. Use this position to carry out rapid heating or cooling of the
cab or when the outside air is dirty.
Intake of fresh air from outside
Press this switch (C) to carry out heating or cooling with fresh air taken in from the outside. Use this position when
fresh air is taken in from outside the cab, or when removing the mist from the cab windows.
REMARK
When fresh air is taken into the cab, air pressure in the cab increases, which prevents the dust from entering.
When neither heating nor cooling is needed, bring in clean fresh air to prevent the dust from coming in with your
preferred air flow.