Komatsu PW118MR-11, Руководство по эксплуатации и техническому обслуживанию

Страница: 164 / 462

When the starting switch is ON and “SKIP” is selected, “****” is
displayed in the column of “Operator ID” on the “Monitor Set-
ting” menu screen.
1.
Select “Operator ID” (5) on the “Monitor Setting” menu
screen, then press switch F6 for 1 second.
2.
The “Operator ID Change” screen is displayed.
• Input the already registered ID on the “Operator ID
Change” screen and press F6. Then, the identified ID
can be changed.
A message is displayed below and the screen returns
to the “Monitor Setting” menu screen.
On the “Monitor Setting” menu screen, the inputted ID
is displayed in the column of “Operator ID”.
• When you press switch F1 on the “Operator ID
Change” screen, a message is displayed below and
the screen returns to the “Monitor Setting” menu
screen.
On the “Monitor Setting” menu screen, as the same
way when the starting switch is ON and “SKIP” is se-
lected, “****” is displayed in the column of “Operator
ID”.
In this case, the operator ID is not identified.
EXPLANATION OF COMPONENTS OPERATION
3-92
WENAM00130