Komatsu PW118MR-11, Руководство по эксплуатации и техническому обслуживанию

Страница: 380 / 462

Clean fresh air filter
1.
Unlock the cover (1) at the rear left of the operator's cab
with the starting switch key.
2.
Open cover (1) with the hand.
3.
Fix the cover with cover support lever (3).
4.
Remove filter (2).
5.
Clean the filter (2) with compressed air.
If there is oil on the filter, or if the filter is extremely dirty,
wash it in a neutral detergent. After rinsing it in water, dry it
thoroughly before using it again.
Replace the filter with a new one every year. Replace the
filter with a new one every year. If the clogging of the filter
cannot be removed by blowing with air or washing in wa-
ter, replace the filter immediately.
6.
Return filter (2).
REMARK
The FRESH air filter must be installed facing it in the cor-
rect direction.
When installing, insert the long (L) end of filter (2) into the
filter case first. The cover (1) can not be closed if the short
end (S) is fitted first.
7.
Release cover support lever (3).
8.
Close cover (2).
9.
Lock with the starting switch key.
Do not forget to remove the starting switch key after lock-
ing.
METHOD FOR REPLACING HYDRAULIC TANK BREATHER ELEMENT
k k
WARNING
• Immediately after the engine is stopped, its parts and oil are still very hot and may cause burn in-
jury. Wait for the temperature to go down, and then start the work.
• The oil may spray out when the oil filler cap is removed. Turn it slowly to release the internal pres-
sure, then remove it carefully.
RKA63901
MAINTENANCE PROCEDURE MAINTENANCE
4-52
WENAM00130