Komatsu PW118MR-11, Руководство по эксплуатации и техническому обслуживанию

Страница: 152 / 462

2.
On “Attachment Setting” screen shown in the figure, select
an attachment to adjust and press switch F6.
On “Attachment Setting” screen shown in the figure, you
can perform the following operations with switches F1 to
F6.
F1: Changes the name of the selected attachment setting.
F2: Changes the oil flow rate of the selected attachment
setting.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on the first line, it moves to the last line.
F5: Cancels the selection and returns the screen to “Machine Setting” menu screen.
F6: Allocates the selected setting to that of ATT/P or ATT/E mode.
Changing Attachment Setting name
You can change the name for Attachment Setting name as you like.
You can use alphabet letters A to Z, Arabic numerals 0 to 9, symbols #, *, +, -, and /, and the space.
1.
Select an attachment to change its name on “Attachment
Setting” screen, then press switch F6.
2.
The “Attachment Name Setting” screen is displayed.
On the “Attachment Name Setting” screen, you can per-
form the following operations with switches F1 to F6.
F1: “CLEAR” Clears all the letters. (If some letters are left.)
F1: “DEFAULT” Displays the initial name. (If all the letters
are deleted.)
F2: Moves to the right letter.
F3: Moves to the next alphabet, numeral, or symbol.
F4: Moves to the previous alphabet, numeral, or symbol.
F5: Returns the screen to “Attachment Setting” screen without changing the name.
F6: Enters the change and returns the screen to “Attachment Setting” screen.
It is not possible to change the name for “No Attachment” setting.
EXPLANATION OF COMPONENTS OPERATION
3-80
WENAM00130