Komatsu PC20R-8 Скачать руководство пользователя страница 95

Страница: 95 / 196

USE OF THE MACHINE

3.6.5.1 STEERING

(CHANGING

DIRECTION)

CHANGING DIRECTION WHEN THE MACHINE IS
NOT MOVING

CHANGING DIRECTION WHEN THE MACHINE IS
MOVING (the left and right travel levers are in the
same position)

HOW TO CARRY OUT A COUNTER-ROTATION
(with the machine not moving)

DANGER

•

When the blade is directed backward, the operation of the travel levers is inverted; before operating the
travel levers, check the position of the blade.

•

If possible, avoid any abrupt change of direction. Counter-rotations should be carried out with the ma-
chine at rest.

•

Due to the considerable friction created when changing direction, it is advisable not to use the speed
increase pedal.

To turn to the left, operate the RIGHT travel lever as indicated
below. To move FORWARD, push the lever. To move BACK-
WARD, pull the lever.

IMPORTANT

☞

•

To turn to the right, operate the LEFT travel lever in the
same way.

RWA07380

To turn to the left, shift the LEFT travel lever back to the neutral
position; the machine will turn to the left.

IMPORTANT

☞

•

To turn to the right, operate the RIGHT travel lever in the
same way.

RWA07390

To turn to the left, pull the LEFT travel lever backward and push
the RIGHT travel lever forward.

IMPORTANT

☞

•

To carry out a counter-rotation to the right, pull the RIGHT
travel lever backward and push the LEFT travel lever for-
ward.

RWA07400

Содержание PC20R-8





































































































































































































Результаты поиска

Содержание PC20R-8

Отзывы:

Бренды по названию

Популярные бренды

Komatsu PC20R-8, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание PC20R-8

Отзывы:

Бренды по названию

Популярные бренды