Komatsu GALEO BR550JG-1, Руководство по эксплуатации и техническому обслуживанию

Страница: 45 / 291

.
SAFETY
PRECAUTIONS FOR MAINTENANCE
SAFETY
PRECAUTIONS FOR MAINTENANCE
Put blocks under the track to prevent the machine from moving.
TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING
To prevent injury, do not carry out maintenance with the engine
running. If maintenance must be carried out with the engine
running, carry out the operation with at least two workers and do as
follows.
One of the two should take his/her stand before the control
panel, all ready to stop the engine any moment.
When working near any revolving parts of the machine, exercise
the special care, since there is always the danger of getting
caught in the revolving parts.
If it becomes necessary to clean the interior of the radiator with
the engine running, turn the mode selector switch (A) to the
"Work" position. Moreover make sure that the work will be
carried out by two workers in combination.
Do not touch the control levers. If it becomes unavoidable to do
so, signal the partner to evacuate to a safe place.
If part of your body or tools touch the fan blades or the fan belt,
they may be cut off, so never touch any of them.
PRECAUTIONS FOR CONVEYOR MAINTENANCE
Since you may get caught in the moving belt conveyor or the rollers, observe the following strictly.
When maintaining the belt conveyor and the rollers, be sure to stop the belt conveyor and the engine, and then
start the work.
When correcting zigzag movement of the belt conveyor, stop it once, and then start the work.
2 - 32
https://tractormanualz.com