Komatsu GALEO BR550JG-1, Руководство по эксплуатации и техническому обслуживанию

Страница: 280 / 291

.
ATTACHMENTS, OPTIONS
RADIO CONTROL UNIT
ON USE OF RADIO CONTROL UNIT
SAFETY PRECAUTIONS WHEN USING RADIO CONTROL UNIT
Several electronic and mechanical safety devices are provided in this radio control unit. One of them is that, once
a transmission code is set, it will not accept any signal for work from the other transmitter.
Please be reminded that depending on a wrong operation or use of the unit, there are always the following dangers.
A machine operator or workers in the surrounding may be critically injured.
Damages may be inflicted on the machine, its apparatus and materials fed into the machine.
This unit has to be operated only by a qualified person who has received a proper training and in accordance with
the instructions for operation set forth in this manual.
FACTORS OF HAZARD
The machine can be remote-controlled using a wave in this system. A work instruction can be conveyed to the
opposite side of an obstacle, or to a place where an operator cannot see. Hence observe the following.
When leaving the radio controller away from an operator, be
sure to turn POWER switch (1) off and pull out the key. Confirm
then that the switch is at the OFF (0) position.
When installing the unit somewhere, or when carrying out
maintenance and repair works on the machine, be sure to turn
the POWER switch of the unit to the OFF position.
Never try to remove any of the safety devices in this unit nor
modify any of them.
QUALIFICATIONS FOR UNIT OPERATOR
An operator of this unit is required to carefully read both operation manuals for the machine and the unit and
thoroughly understand both operation methods. If the transmitter is left away from an operator, do not forget to
remove the key. This practice is necessary to prevent someone from operating the transmitter carelessly.
The supervisor of operations using the unit, the machine owner and administrator have a responsibility to ensure
that a unit operator has an easy access to the operation manuals, and to confirm that he/she reads them and
understands all the contents.
ESTABLISHING SAFETY MEASURES AT WORKSITE
An operator is required to ensure safety at the work site where he/she uses the radio control unit. Make sure that
there is no danger of slipping or tripping over something.
6 - 22
https://tractormanualz.com