Komatsu GALEO BR550JG-1, Руководство по эксплуатации и техническому обслуживанию

Страница: 35 / 291

.
SAFETY
PRECAUTIONS FOR OPERATION
TRAVELING ON SLOPES
When traveling downhill, lower the engine speed, keep the
travel lever close to the neutral position, and travel at low speed.
Always travel straight up or down a slope. Traveling at an angle
or across the slope is extremely dangerous.
Do not turn on slopes or travel across slopes. Always go down
to a flat place to change the position of the machine, then travel
on to the slope again.
Travel on grass, fallen leaves, or wet steel plates with low
speed. Even with slight slopes there is a hazard that the
machine may slip.
If the engine stops when the machine is traveling on a slope,
move the control levers immediately to the neutral position and
start the engine again.
PRECAUTIONS WHILE IN OPERATION
Park the machine on the even and solid ground for starting the work.
When operating in tunnels, under bridges, under electric wires, or other places where the height is limited, be
extremely careful not to let the work equipment hit anything.
To prevent accidents caused by hitting other objects, always operate the machine at a speed which is safe for
operation, particular in confined spaces, indoors, and in places where there are other machines.
OPERATE CAREFULLY ON SNOW
Snow-covered or frozen surfaces are slippery, so be extremely careful when traveling or operating the machine,
and do not operate the levers suddenly. Even a slight slope may cause the machine to slip, so be particularly
careful when working on slopes.
With frozen ground surfaces, the ground becomes soft when the temperature rises, and this may cause the
machine to tip over.
If the machine enters deep snow, there is a hazard that it may tip over or become buried in the snow. Be careful
not to leave the road shoulder or to get trapped in a snow drift.
2 - 22
https://tractormanualz.com