Kollmorgen SERVOSTAR 400, Сборка и установка

Страница: 58 / 76

5.3.2
Key pad controls and status displays
Two keys are fitted in the operating panel of the master. Here you can enter the basic
address for the system and call up status information on all the axes that are connected.
5.3.2.1
Operating
The two keys can be used to perform the following functions:
Key symbol Functions
U
press once : go up one menu item, increase number by one
press twice in rapid succession : increase number by ten
U
press once : go down one menu item, decrease number by one
press twice in rapid succession : decrease number by ten
U
U
press and hold right key, then press left key as well :
enters a number, return function
5.3.2.2
Status display on the axis module
Each axis module is fitted with 2 LEDs that provide a quick indication of the instrument
status.
LED
red green Interpretation
lit off axis is not ready for operation (fault)
blinking off a warning has been generated
off lit axis is ready for operation, and enabled
off blinking axis is ready for operation, but not enabled
blinking blinking axis is selected for editing by the master
A detailed display of the warnings and faults can be called up in the display on the master
(
ð
p.59).
58 SERVO
STAR ®
400 Installation Manual
Setup
07/05
Kollmorgen